China Custom 6pk2260 V-Ribbed Belt, Rib 6X2260mm Auto Parts with Best Sales

Product Description


We are the rubber product factory HEYI RUBBER Co.,Ltd,  specializing  in various
of V belt(Fan Belt,Raw Edge V Belt,Variable Speed Belt,Joint V Belt),   oil seal and 
other  rubber  product. Use for agriculture, industrial and automotive. Customized
service can be offered any time.

Product Description:                                                           
The HEIYI  V RIBBED BELT, also termed poly v-belt, with the characteristic V-ribs
which is resistant to oil and temperature stresses, static dissipating. The  belts  are
developed to improve capacity with outstanding performance  at higher  speeds on
smaller diameter pulleys.  The  v-profiles  of  the  belt  are  in  a  special formulated
rubber compound with direction oriented fibres that cut noise and provide very high
flexibility and stability.
 

Product Name Poly V Belt/Drive Belt/Fan Belt/Serpentine Belt/V-ribbed Belt/ Length Range 500mm-5000mm
Brand Name HEIYI Port ZheJiang
Application Auto/Industrial Belt Type PK/PJ/PL
Usage Engine Cooling System/ Water Pump/ Industrial power transmission Packing Plastic Bag/Carton  

Application                                                                          
The  HEIYI   V  RIBBED  BELT , can replace several traditional  belts  and reduce
operating costs considerably.  The belt also distinguishes themselves by their light
and vibration free operation and long life.The low cross section of the multi-rib belt
makes it very flexible and permits it to be used in serpentine drives.

Contact                                                                                 

All Series                                                                         

Factory                                                                                

The Exhibition                                                                    

Drive shaft type

The driveshaft transfers torque from the engine to the wheels and is responsible for the smooth running of the vehicle. Its design had to compensate for differences in length and angle. It must also ensure perfect synchronization between its joints. The drive shaft should be made of high-grade materials to achieve the best balance of stiffness and elasticity. There are 3 main types of drive shafts. These include: end yokes, tube yokes and tapered shafts.
air-compressor

tube yoke

Tube yokes are shaft assemblies that use metallic materials as the main structural component. The yoke includes a uniform, substantially uniform wall thickness, a first end and an axially extending second end. The first diameter of the drive shaft is greater than the second diameter, and the yoke further includes a pair of opposing lugs extending from the second end. These lugs have holes at the ends for attaching the axle to the vehicle.
By retrofitting the driveshaft tube end into a tube fork with seat. This valve seat transmits torque to the driveshaft tube. The fillet weld 28 enhances the torque transfer capability of the tube yoke. The yoke is usually made of aluminum alloy or metal material. It is also used to connect the drive shaft to the yoke. Various designs are possible.
The QU40866 tube yoke is used with an external snap ring type universal joint. It has a cup diameter of 1-3/16″ and an overall width of 4½”. U-bolt kits are another option. It has threaded legs and locks to help secure the yoke to the drive shaft. Some performance cars and off-road vehicles use U-bolts. Yokes must be machined to accept U-bolts, and U-bolt kits are often the preferred accessory.
The end yoke is the mechanical part that connects the drive shaft to the stub shaft. These yokes are usually designed for specific drivetrain components and can be customized to your needs. Pat’s drivetrain offers OEM replacement and custom flanged yokes.
If your tractor uses PTO components, the cross and bearing kit is the perfect tool to make the connection. Additionally, cross and bearing kits help you match the correct yoke to the shaft. When choosing a yoke, be sure to measure the outside diameter of the U-joint cap and the inside diameter of the yoke ears. After taking the measurements, consult the cross and bearing identification drawings to make sure they match.
While tube yokes are usually easy to replace, the best results come from a qualified machine shop. Dedicated driveshaft specialists can assemble and balance finished driveshafts. If you are unsure of a particular aspect, please refer to the TM3000 Driveshaft and Cardan Joint Service Manual for more information. You can also consult an excerpt from the TSB3510 manual for information on angle, vibration and runout.
The sliding fork is another important part of the drive shaft. It can bend over rough terrain, allowing the U-joint to keep spinning in tougher conditions. If the slip yoke fails, you will not be able to drive and will clang. You need to replace it as soon as possible to avoid any dangerous driving conditions. So if you notice any dings, be sure to check the yoke.
If you detect any vibrations, the drivetrain may need adjustment. It’s a simple process. First, rotate the driveshaft until you find the correct alignment between the tube yoke and the sliding yoke of the rear differential. If there is no noticeable vibration, you can wait for a while to resolve the problem. Keep in mind that it may be convenient to postpone repairs temporarily, but it may cause bigger problems later.
air-compressor

end yoke

If your driveshaft requires a new end yoke, CZPT has several drivetrain options. Our automotive end yoke inventory includes keyed and non-keyed options. If you need tapered or straight holes, we can also make them for you.
A U-bolt is an industrial fastener that has U-shaped threads on its legs. They are often used to join 2 heads back to back. These are convenient options to help keep drivetrain components in place when driving over rough terrain, and are generally compatible with a variety of models. U-bolts require a specially machined yoke to accept them, so be sure to order the correct size.
The sliding fork helps transfer power from the transfer case to the driveshaft. They slide in and out of the transfer case, allowing the u-joint to rotate. Sliding yokes or “slips” can be purchased separately. Whether you need a new 1 or just a few components to upgrade your driveshaft, 4 CZPT Parts will have the parts you need to repair your vehicle.
The end yoke is a necessary part of the drive shaft. It connects the drive train and the mating flange. They are also used in auxiliary power equipment. CZPT’s drivetrains are stocked with a variety of flanged yokes for OEM applications and custom builds. You can also find flanged yokes for constant velocity joints in our extensive inventory. If you don’t want to modify your existing drivetrain, we can even make a custom yoke for you.

China Custom 6pk2260 V-Ribbed Belt, Rib 6X2260mm Auto Parts     with Best SalesChina Custom 6pk2260 V-Ribbed Belt, Rib 6X2260mm Auto Parts     with Best Sales