Опис
Precision Linear Motion
V-Type Ground Straight Guide Rack
DIN6e25 precision-ground V-guide racks engineered for demanding UK industrial applications — from CNC machine tools to automated assembly lines. Surface hardness HRC55–60, four-face ground for unmatched geometric consistency.
The V-Type Ground Straight Guide Rack is a precision linear motion component built to perform where accuracy is not negotiable. Manufactured from S45C or 42CrMo alloy steel, each rack undergoes a four-face surface grinding process, followed by V-groove rail grinding to achieve a total pitch error of GTF/1000 < 0.036 mm — a benchmark that aligns with the most exacting DIN standards in use across British manufacturing today.
Whether you are specifying linear drive systems for gantry robotics, surface grinders, laser cutting beds, or heavy-duty portal milling centres, the V-type profile provides inherent self-alignment under load, reducing installation time and long-term maintenance costs. The rack pairs naturally with precision pinions and is available in module pitches from 1.5915 to 3.1831, with effective lengths from 630 mm to 1230 mm.
Why UK Engineers Choose This Rack
DIN6e25 Precision Grade
Total pitch error below 0.036 mm per 1000 mm guarantees repeatable positioning accuracy in closed-loop servo and stepper-driven systems.
Dual-Alloy Material Options
S45C carbon steel delivers cost-efficiency for standard duty; 42CrMo alloy steel provides higher fatigue resistance for heavy-load continuous cycling applications.
Surface Hardness HRC55–60
High-frequency induction hardening to HRC48–52, then carbonitriding to HRC55–60, creates a surface layer that resists pitting and abrasive wear even under lubrication-starved conditions.
Four-Face Ground Geometry
All four body faces are ground flat before the V-profile is machined, ensuring the mounting reference and tooth profile share a common datum. This eliminates accumulated error during assembly.
V-Guide Rail Hardness HRC50–55
The integral V-guide rail surface is independently hardened to HRC50–55, providing the carriage bearing surface with long-term dimensional stability under cyclic lateral and vertical loads.
Custom OEM Capability
Non-standard lengths, hole patterns, and module pitches are available on request. Our engineering team supports full drawing review and prototype supply for UK OEM customers.
Material, Hardening Process & Application Scenarios
The choice of base material directly affects fatigue life and machinability. S45C medium-carbon steel is the standard selection: it offers good hardenability, predictable machining behaviour, and adequate strength for the majority of CNC machine tool and automated conveyor applications found across UK manufacturing. When the application involves shock loading, elevated temperatures, or continuous high-speed cycling — as is common in aerospace fixtures or heavy grinding machines — the 42CrMo chromium-molybdenum alloy variant is recommended. Its higher tensile strength and superior core toughness allow it to absorb impact energy without crack propagation through the hardened surface layer.
The hardening sequence is two-stage by design. High-frequency induction hardening brings the tooth flanks and root area to HRC48–52, generating a compressive residual stress profile that resists fatigue crack initiation. Carbonitriding then drives the surface hardness to HRC55–60 while maintaining a tough, ductile core — a proven combination for rack-and-pinion systems that must survive millions of load cycles without pitch-face micro-pitting. The V-guide rail surface follows a separate hardening pass, independently verified to HRC50–55, so both functional surfaces are controlled separately rather than relying on a single bulk treatment.
Typical UK application sectors include CNC gantry milling and boring machines, laser and plasma cutting tables, coordinate measuring machine (CMM) axes, robotic pick-and-place gantries, semiconductor wafer handling equipment, and specialist woodworking and stone-cutting machinery where high positioning throughput and low cumulative error are both essential.
Technical Specifications
Total pitch error: GTF/1000 < 0.036 mm | Dimension unit: mm | Precision grade: DIN6e25 | Tooth type: Straight
All specifications subject to change without notice. Contact us before ordering to confirm current data.
Customer Success Stories
Across the UK and Europe, engineering teams have integrated our V-Type Ground Straight Guide Racks into production systems that demand sustained precision over years of continuous operation. The following cases reflect real challenges and the measurable outcomes achieved through specifying the correct rack grade and material combination.
🇬🇧 UK | Precision Engineering
A Birmingham-based machine tool builder was retrofitting the X-axis of a five-metre portal milling centre for an aerospace sub-contract facility. After switching from a standard DIN10 rack to our VX55335123 (module 3.1831, 42CrMo), they recorded a 60% reduction in positioning drift over a six-month production run at full spindle load, avoiding an unplanned rebuild that had been scheduled for year one.
— Procurement Manager, Midlands CNC Retrofit Specialist
🇩🇪 Germany | Laser Cutting Systems
A German OEM producing high-speed fibre laser cutting tables needed a V-guide rack that could handle 120 m/min traverse speeds while maintaining cut-path accuracy below 0.05 mm/m. The VX55325123 at module 2.3873 was specified across both X and Y axes. After 18 months of three-shift production, tooth wear measurement remained within the original DIN6e25 tolerance band — with no scheduled regrind required.
— Chief Design Engineer, Baden-Württemberg Laser OEM
🇦🇺 Australia | Robotics Integration
A Melbourne robotics integrator building seven-axis collaborative welding gantries needed compact, pre-drilled racks compatible with servo-pinion systems from multiple pinion suppliers. The VX55315103 at module 1.5915 provided the fine-pitch drive resolution required for seam-tracking accuracy. Delivery of 120 racks to a 14-day schedule was met in full, enabling the integrator to commission on time for a major automotive supplier.
— Project Lead, Victoria Welding Automation
Manufacturing Facility & Customisation Services
Our manufacturing base operates a vertically integrated precision grinding facility equipped with Studer and Okamoto multi-axis CNC surface and profile grinders. Every V-Type Ground Straight Guide Rack leaves the factory with a full inspection record covering pitch error, surface hardness, straightness, and cross-section dimensions — traceable to national calibration standards. For UK distributors and OEM customers, we maintain stock of fast-moving codes and offer scheduled consignment programmes to suit KANBAN-controlled procurement systems.
Product customisation is a core competency, not an afterthought. We routinely accept non-standard rack lengths (spliced or single-piece), modified hole pitch and pattern, alternative mounting profiles, special coating or surface treatment (phosphating, black oxide, electroless nickel), and dedicated module or pressure angle variants for proprietary pinion systems. Our engineering team reviews customer drawings within 48 hours and can provide dimensional confirmation samples ahead of volume production. Minimum order quantities for custom codes are negotiable — we understand that prototyping and pre-production phases have different economics from volume runs.
Browse our related precision linear motion products: Induction Hardened Helical Rack with Surface Treatment and Precision Ground Helical Rack — both engineered to the same exacting standards.
Frequently Asked Questions
Ready to specify the V-Type Ground Straight Guide Rack for your project?
Send your drawing, quantity, and delivery requirements — our team responds within one business day.
edit by gzl
